PCB Brushing Machine (Scrubbing Machine)
.jpg)
Products
PCB Brushing Machine (Scrubbing Machine)
Single Side or double side machine for deoxidizing, light de-burring & surface finishing of printed circuit boards. All types of brushes can be used on the machine. Brush changing is simpler. De-burring or scrubbing is complete by high pressure water rinsing after recirculating system is also present. Total interior is made by stainless steel & PP Sheet. Each brush has independent drive & can be operated separately. Conveyor speed is variable from 0.25m to 1.5m/min.
Also We can make Customized machine in this machine type.
Technical Features
| Conveyor Width | 610mm |
| Operation | Semi- Automatic |
| Conveyor Speed | 0.5 to 3Mtrs/Min |
| Production Speed | 1 Sq.m/min |
| Conveyor Working Width | 610 mm |
| Board Thickness | 0.8 to 3.2 mm |
| PCB Size Minimum | 150 x 150 mm |
| PCB Size Maximum | 610 x 1250mm Maximum |
| Operating Temperature | 80 °c |
| Conveyor Pitch | 75mm |
| Brush Size | OD 125 mm x L610 x ID 50.8 mm -2 Nos. |
| Brushing Speed | 1440 Rpm |
| Main Roller | Nitrile |
| Brush Type | Nylon Bristle |
| Temperature Controller | Digital |
| ColdAir | High Pressure Air Knife |
| Hot Air | Through Heater Chamber |
